Hardware for Forstner Drill Jig

Description

The necessary hardware for the Forstner Drill Sharpening Jig:

• Machine Screw, hex head M6 x 70 mm
• Machine Screw, hex head M6 x 40 mm
• Machine Screw, hexagon socket, M6 x 50 mm
• Machine Screw, hex head M8 x 100 mm
• Two M6 nuts
• M8 nut
• 12 Wood screws 3,5 x 20 mm

All the pieces are actually standard hardware but most of them only come in packs of 10. With this package you have (except for a piece of plywood) all the non-3d printed parts that you will need for the 3d printed Forstner Bit Sharpening jig.